Makita LC1230 TCT Cut Off Saw

As low as £400.68 £333.90
diameter: 305mm
bore: 25.4mm

Free Delivery on orders over £100 or a £5.99 charge applies.


Check our warranty information

Makita LC1230 TCT cut-off saw for cutting steel tubing or steel plate.

Makita LC1230  will give a nice clean cut and very few sparks due to the tct saw blade used. The material will also be cool to handle after cut unlike using an abrasive machine were the product remains hot and the finish is less stylish.


  • Fast cuts in light pipe, angle iron, tubing, conduit and channels.
  • Carbide tipped blade lasts much longer than abrasive discs and cuts cleanly and accurately.
  • No sparks and virtually burr free.
  • Particularly cost effective in production and workshop environments.
  • 4 x faster cutting in light pipe, angle iron, tubing, conduit and channel than abrasive cut-off saws
  • Powerful 15 AMP motor


  • 305mm Wheel diameter
  • 25.4mm Hole diameter
  • 15mm Cut @ 90ø
  • 90mm Cut @ 45ø
  • 1,300rpm No Load Speed
  • 1,650W Input Wattage
  • 19Kg Net Weight

Standard Equipment:

  • Socket Wrench
Customer Questions
No Questions
Please, mind that only logged in users can submit questions

In the unlikely event that you need to return an item, please contact our team on [email protected] within 14 days of accepting delivery of the item. Exemptions to returns may apply in line with current legislation.

All returns must be sent to our distribution centre, details below, however we do request that you discuss the return with one of  friendly team, who will help with the process.



c/o SIG
Unit 10
Kingsmark Freeway
BD12 7HW



Please note all refunds will be made to the card used to order the goods. In the case of returned items a refund will be made when we are in receipt of the item(s). Refunds can take up to three days to show on your account.

All power tools are subject to minimum warranty of 12 months, most offer an extended warranty when your tool is registered online.  Most manufacturers have approved service agents and in the first instance it may be quicker and easier to take the tool to them with your proof of purchase. Your warranty begins from your date of purchase. If you are not near a warranty agent then many of the manufacturers will collect the tool from you. Please find the links below for each manufacturer and their warranty policy and procedures. 

We recommend that where appropriate that you register for the 3 year warranty, this will give you peace of mind when purchasing your tool.  Please note that if the failure of the tool is down to miss use by the operator, or is repaired by non-approved agent then this invalidates the warranty. There is no loan tool service whilst your machine is in for repair and in the majority of cases the machine will be repaired and not replaced. If you are unsure then please do not hesitate to contact us and we will be happy to help.









Free delivery on orders over £100 or a £5.99 charge applies, terms and conditions apply

Roof Stores

For all your roofing needs

Visit RoofStores

Insulation Express

Need Insulation? Insulation Express can help

Visit Insulation Express >>