Makita HP2051F 2-Speed Percussion Drill

As low as £139.86 £116.55

Free Delivery on orders over £100 or a £5.99 charge applies.


Check our warranty information

Makita HP2051F 13mm 2-Speed Percussion Drill (Keyless Chuck)

Makita HP2051F Percussion Drill uses a shock-proofing, high output LED white light illuminating drilling surface and increases visibility and safe use of these power tools, the bulb never needs replacing throughout the life of the tool.

Makita HP2051F powerful 720w motor allows this to be one of the lightest drills on the market at 2.3kgs plus the 2-mode selection allows hammering with rotation and rotation only plus the positive stop mode selector preventing accidental mode disengagement.

A safety built-in torque limiter stops bit rotation when hitting reinforcement to prevent kick-back through the machine and the large trigger switch and 360° swivel side handle gives the tradesman added comfort and control. An easy use recessed lock-on button gives continuous use and the machine is supplied with a ball bearing construction extending motor life and the ergonomic and well balanced design with rubberized grip gives total control and reducing operator fatigue


  • Extra-low vibration level for reduced operator fatigue.
  • Dual purpose for 'Rotation Only' and 'Rotation with hammering'.
  • Built-in torque limiter stops bit rotation when hitting reinforcements.
  • Industrial strength keyed chuck.
  • Impact resistant contoured handle with rubber cushion.
  • Metal gear housing for durability and long tool life.


  • Max in Steel: Hi 8mm / Lo 13mm
  • Max in Wood: Hi 25mm / Lo 40mm
  • Max in Masonry: Hi 13mm / Lo 20mm
  • Blows per minute: Hi 0-58,000bpm / Lo -24,000bpm
  • No Load Speed: Hi 0-2,900rpm / Lo 0-1,200rpm
  • Input wattage: 720w
  • Net Weight: 2.3kg
  • Available in 110v and 240v

Standard Equipment:

  • Side handle
  • Depth Gauge.
  • Carry Case
  • Job Light
Customer Questions
No Questions
Please, mind that only logged in users can submit questions

In the unlikely event that you need to return an item, please contact our team on [email protected] within 14 days of accepting delivery of the item. Exemptions to returns may apply in line with current legislation.

All returns must be sent to our distribution centre, details below, however we do request that you discuss the return with one of  friendly team, who will help with the process.



c/o SIG
Unit 10
Kingsmark Freeway
BD12 7HW



Please note all refunds will be made to the card used to order the goods. In the case of returned items a refund will be made when we are in receipt of the item(s). Refunds can take up to three days to show on your account.

All power tools are subject to minimum warranty of 12 months, most offer an extended warranty when your tool is registered online.  Most manufacturers have approved service agents and in the first instance it may be quicker and easier to take the tool to them with your proof of purchase. Your warranty begins from your date of purchase. If you are not near a warranty agent then many of the manufacturers will collect the tool from you. Please find the links below for each manufacturer and their warranty policy and procedures. 

We recommend that where appropriate that you register for the 3 year warranty, this will give you peace of mind when purchasing your tool.  Please note that if the failure of the tool is down to miss use by the operator, or is repaired by non-approved agent then this invalidates the warranty. There is no loan tool service whilst your machine is in for repair and in the majority of cases the machine will be repaired and not replaced. If you are unsure then please do not hesitate to contact us and we will be happy to help.









Free delivery on orders over £100 or a £5.99 charge applies, terms and conditions apply

Roof Stores

For all your roofing needs

Visit RoofStores

Insulation Express

Need Insulation? Insulation Express can help

Visit Insulation Express >>