Makita EK6100 305mm Disc Cutter

£628.74 £523.95

Free Delivery on orders over £100 or a £5.99 charge applies.


Check our warranty information

Makita Petrol Disc cutter 305mm (12")  EK6100 is equipped with 61cm³ 2-stroke engine with stratified scavenging system.

Makita has updated the DPC6430 12" stone cutting saw and this machine is a worthy rival to the Stihl TS410.


  • Lightweight 1.2kg (2.6lbs) lighter than DPC6430
  • Enhanced air filtration cyclone pre-separation system effectively removes dust particles away from intake air and reduces dust stuck on the filter.
  • Rapid start pull force required to start the machine is drastically reduced with spring-assisted recoil starter.
  • Touch and Stop Switch
  • Fuel primer for easy starting.
  • High quality driving belt does not require tensioning once the proper tension is adjusted.
  • Enhanced Air Filtration
  • Developed in compliance with all known exhaust emission regulations
  • Lightweight 1.2kg (2.6lbs) lighter than DPC6430
  • Water supply with intake filter and fine adjustment for adequate dust protection.


  • Dry Weight - 8.5 kg
  • Max. Cutting Depth - 110 mm
  • Noise sound pressure - 100 dB(A)
  • Noise sound power - 109 dB(A)
  • Engine - 2-Stroke
  • Arbor - 20 mm
  • Max Wheel Speed - 5,100 rpm
  • Wheel diameter - 305 mm
  • Power Rating - 4.2 hp
  • Fuel Tank Capacity - 0.7 litres
  • Fuel Type - Mixed Gasoline
  • Displacement - 61 cm³
  • Power Rating - 3.2 kW
  • Vibration: Right Handle (Rear grip) - 3.6 m/sec²
  • Vibration: Left Handle (Front grip) - 3.0 m/sec²

Standard Equipment:

  • Tool kit
  • Dust suppression kit
Customer Questions
No Questions
Please, mind that only logged in users can submit questions

In the unlikely event that you need to return an item, please contact our team on [email protected] within 14 days of accepting delivery of the item. Exemptions to returns may apply in line with current legislation.

All returns must be sent to our distribution centre, details below, however we do request that you discuss the return with one of  friendly team, who will help with the process.



c/o SIG
Unit 10
Kingsmark Freeway
BD12 7HW



Please note all refunds will be made to the card used to order the goods. In the case of returned items a refund will be made when we are in receipt of the item(s). Refunds can take up to three days to show on your account.

All power tools are subject to minimum warranty of 12 months, most offer an extended warranty when your tool is registered online.  Most manufacturers have approved service agents and in the first instance it may be quicker and easier to take the tool to them with your proof of purchase. Your warranty begins from your date of purchase. If you are not near a warranty agent then many of the manufacturers will collect the tool from you. Please find the links below for each manufacturer and their warranty policy and procedures. 

We recommend that where appropriate that you register for the 3 year warranty, this will give you peace of mind when purchasing your tool.  Please note that if the failure of the tool is down to miss use by the operator, or is repaired by non-approved agent then this invalidates the warranty. There is no loan tool service whilst your machine is in for repair and in the majority of cases the machine will be repaired and not replaced. If you are unsure then please do not hesitate to contact us and we will be happy to help.









Free delivery on orders over £100 or a £5.99 charge applies, terms and conditions apply

Roof Stores

For all your roofing needs

Visit RoofStores

Insulation Express

Need Insulation? Insulation Express can help

Visit Insulation Express >>