Makita DHP453FX12 18V Combi Drill 1 X 3.0Ah Li-Ion LXT Battery & 101 Piece Drill And Driver Set

From  £360.00  inc VAT
From  £300.00  ex VAT
In stock
From  £360.00  inc VAT
From  £300.00  ex VAT

Free Delivery on orders over £100 or a £5.99 charge applies.

Check our warranty information

array(1) { [0]=> string(128) "" }

Makita DHP453FX12 18V Combi Drill 1 X 3.0Ah Li-Ion LXT Battery & 101 Piece Drill And Driver Set


  • High comfort grips
  • Two-speed gearbox with all metal gears
  • Conveniently located push button for forward and reverse
  • Compact and lightweight design for easy handling
  • Single sleeve keyless drill chuck for easy bit installation and removal
  • 22 minute charge time with the air cooled Makstar Optimum Charging System
  • Lithium-ion batteries have greater life spans than their Ni-MH or Ni-Cad counterparts giving 430 percent greater run time
  • Temperature overload function which shuts down unit automatically if it overheats
  • Variable speed trigger for perfect control when screwdriving


  • Voltage: 18 volt
  • Battery Type: Lithium-Ion
  • Battery Capacity: 3.0Ah
  • Maximum Torque: 42 Nm
  • Torque Setting: 16+ Drill
  • No-Load Speed: 1300-400 rpm
  • Impact Rate: 19500-6000 bpm
  • Maximum Cutting Capacity (Wood): 36 mm
  • Maximum Cutting Capacity (Masonry): 13 mm
  • Maximum Cutting Capacity (Steel): 13 mm
  • Vibration (Drilling): 2.5 m/s²
  • Vibration (Hammer Drilling): 7.5 m/s²
  • Vibration K Factor: 1.5 m/s²
  • Sound Pressure Level: 78 dB(A)
  • Sound Pressure Level Uncertainty: 3 dB(A)

Comes with:

  • 1 x 3.0Ah Batteries
  • 1 x Charger
  • 13 x Nutdrivers
  • 4 x Drill Stop
  • 1 x Hex Key
  • 2 x Screw Holders
  • 1 x Center Punch
  • 1 x Counter Sink
  • 6 x Brad Point Drills
  • 6 x HSS Drills
  • 6 x Masonry Drills
  • 3 x Flat Bits
  • 5 x Hole Saws
  • 1 x Bit Driver Handle
Returns and Refunds

In the unlikely event that you need to return an item, please contact our team on [email protected] within 14 days of accepting delivery of the item. Exemptions to returns may apply in line with current legislation.

All returns must be sent to our distribution centre, details below, however we do request that you discuss the return with one of  friendly team, who will help with the process.

c/o SIG
Unit 10
Kingsmark Freeway
BD12 7HW

Please note all refunds will be made to the card used to order the goods. In the case of returned items a refund will be made when we are in receipt of the item(s). Refunds can take up to three days to show on your account.


All power tools are subject to minimum warranty of 12 months, most offer an extended warranty when your tool is registered online.  Most manufacturers have approved service agents and in the first instance it may be quicker and easier to take the tool to them with your proof of purchase. Your warranty begins from your date of purchase. If you are not near a warranty agent then many of the manufacturers will collect the tool from you. Please find the links below for each manufacturer and their warranty policy and procedures. 

We recommend that where appropriate that you register for the 3 year warranty, this will give you peace of mind when purchasing your tool.  Please note that if the failure of the tool is down to miss use by the operator, or is repaired by non-approved agent then this invalidates the warranty. There is no loan tool service whilst your machine is in for repair and in the majority of cases the machine will be repaired and not replaced. If you are unsure then please do not hesitate to contact us and we will be happy to help.









Free delivery on orders over £100 or a £5.99 charge applies, terms and conditions apply

Roof Stores

For all your roofing needs

Visit roof stores >


Insulation Express

Need Insulation? Insulation Express can help

Visit insulation express >

insulation express