Everbuild 710 Self Level Flexiplus Tub 10kg
Free Delivery on orders over £100 or a £5.99 charge applies.
| Everbuild Self Level Flexiplus is a latex modified cement based powder, which, when mixed with water, can be used to level out uneven floors and screeds. Typical surfaces include concrete and screeding, existing ceramic tiles, asphalt, wood, brick, stone etc. This product is intended for use prior to laying ceramic tiles, thermoplastic tiles, lino, wood block flooring or carpet. Self Level Flexiplus already contains powdered latex, eliminating the need for separate expensive latex liquids. When mixed as directed, the compound provides a free flowing mix that sets in 90 minutes and can be overlaid after only 8 hours at normal temperatures... NOTE: This product is not suitable for use as a final wearing surface. |
Enhanced flow properties coupled with long open time giving easy trowelling.
Fast setting  sets in 8 hours.
Up to 6mm in depth in one coat.
Protein (casein) free.
Areas for Use:
For levelling uneven subfloors prior to covering/tiling, without the need to use a separate latex additive.
The product will not resist rising damp. In these conditions, use in conjunction with BLACKJACK D.P.M liquid dampproof membrane as directed.
Note that setting time will be greatly increased when overlaying impervious surfaces and in cold weather.
Appearance: Fine grey powder.
SG at 20°C: 1.6gcm³ (dry) 2.3 gcm³ (wet or cured).
Application Temp: 4°C to 35°C.
Service Temp: 30 to 70°C.
Open Time: 30 mins @20°C.
Thickness: 0.5mm 6mm.
Setting Time: 8 hours @20°C.
Coverage: 20kg covers approximately 5m² at 3mm (standard) depending on porosity of substrate.
In the unlikely event that you need to return an item, please contact our team on [email protected] within 14 days of accepting delivery of the item. Exemptions to returns may apply in line with current legislation.
All returns must be sent to our distribution centre, details below, however we do request that you discuss the return with one of friendly team, who will help with the process.
Please note all refunds will be made to the card used to order the goods. In the case of returned items a refund will be made when we are in receipt of the item(s). Refunds can take up to three days to show on your account.
All power tools are subject to minimum warranty of 12 months, most offer an extended warranty when your tool is registered online. Most manufacturers have approved service agents and in the first instance it may be quicker and easier to take the tool to them with your proof of purchase. Your warranty begins from your date of purchase. If you are not near a warranty agent then many of the manufacturers will collect the tool from you. Please find the links below for each manufacturer and their warranty policy and procedures.
We recommend that where appropriate that you register for the 3 year warranty, this will give you peace of mind when purchasing your tool. Please note that if the failure of the tool is down to miss use by the operator, or is repaired by non-approved agent then this invalidates the warranty. There is no loan tool service whilst your machine is in for repair and in the majority of cases the machine will be repaired and not replaced. If you are unsure then please do not hesitate to contact us and we will be happy to help.
BLACK & DECKER