DCK368P3T XR 3 Piece Kit 18V 3 x 18V 5.0Ah Li-Ion
Free Delivery on orders over £100 or a £5.99 charge applies.
The DEWALT DCK368P3T XR 3 Piece Kit, contains the following:
1 x 18 Volt DCD796 XR Brushless Hammer Drill Driver which has an ultra compact, lightweight design. The two speed all metal transmission provides increased run time and longer tool life. It offers a 15 position adjustable torque control for consistent screwdriving.
Chuck: 13mm Keyless.
No Load Speed: 0-550/0-2,000/Min.
Impact Rate: 0-9,350/34,000/bpm.
Max Torque: 27/70Nm, 15 Settings.
Capacity: Steel: 13mm, Masonry: 13mm, Wood: 40mm.
1 x 18 Volt DCF887 XR Brushless Impact Driver that is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design.
Bit Holder: 6.35mm (1/4in).
No Load Speed: 0-850/0-2,100/0-3,000/Min.
Impact Rate: 0-1,800/0-2,900/0-3,700/bpm.
Max Torque: 26/80/203Nm.
1 x 18 Volt DCH273 Brushless XR 3 Mode Hammer fitted with an electronic clutch for consistently high torque and improved durability. Ideal for drilling anchors and fixing holes into concrete.
Modes: Rotary, SDS Hammer, Chisel Only.
No Load Speed: 0-1,100/Min.
Impact Rate: 0-4,600/bpm.
Impact Energy: 2.1 Joules.
Capacity: Wood: 26mm, Metal: 13mm, Masonry: 24mm
1 x 10.8-18 Volt DCB115 XR Multi-Voltage Charger which has a compact size, making it easy to store and it is also wall mountable. A bright LED indicator communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold conditions. It is capable of charging a 2.0Ah battery pack in 30 minutes.
Also supplied with 3 x 18 Volt 5.0Ah Li-Ion Batteries and 2 x TSTAK™ II Toolboxes.
In the unlikely event that you need to return an item, please contact our team on 0330 123 1763 within 14 days of accepting delivery of the item. Exemptions to returns may apply in line with current legislation.
All returns must be sent to our distribution centre, details below, however we do request that you discuss the return with one of friendly team, who will help with the process.
Please note all refunds will be made to the card used to order the goods. In the case of returned items a refund will be made when we are in receipt of the item(s). Refunds can take up to three days to show on your account.
All power tools are subject to minimum warranty of 12 months, most offer an extended warranty when your tool is registered online. Most manufacturers have approved service agents and in the first instance it may be quicker and easier to take the tool to them with your proof of purchase. Your warranty begins from your date of purchase. If you are not near a warranty agent then many of the manufacturers will collect the tool from you. Please find the links below for each manufacturer and their warranty policy and procedures.
We recommend that where appropriate that you register for the 3 year warranty, this will give you peace of mind when purchasing your tool. Please note that if the failure of the tool is down to miss use by the operator, or is repaired by non-approved agent then this invalidates the warranty. There is no loan tool service whilst your machine is in for repair and in the majority of cases the machine will be repaired and not replaced. If you are unsure then please do not hesitate to contact us and we will be happy to help.
BLACK & DECKER