DCK229P2T XR Twin Pack 18V 2 x 5.0Ah Li-Ion
Free Delivery on orders over £100 or a £5.99 charge applies.
The DEWALT DCK229P2T XR Twin Pack, contains the following:
1 x 18 Volt DCH273 Brushless XR 3 Mode Hammer is fitted with an electronic clutch for consistently high torque and improved durability. Ideal for drilling anchors and fixing holes into concrete.
Modes: Rotary, SDS Hammer, Chisel Only.
No Load Speed: 0-1,100/min.
Impact Rate: 0-4,600/bpm.
Impact Energy: 2.1 Joules.
Capacity: Wood: 26mm, Metal: 13mm, Masonry: 24mm
1 x 18 Volt DCD996 XR Brushless Combi Drill with a tough 3 speed all metal transmission for increased run time and a longer tool life. Electronic Clutch with 11 position adjustable torque control for optimised precision when screwdriving. Also has an improved 3 position LED torch with high/medium/low settings.
Chuck: 13mm Keyless.
No Load Speed: 0-450/0-1,300/0-2,000/min.
Impact Rate: 0-8,600/0-25,500/0-38,250/bpm.
Max Torque: 95Nm, 11 Settings.
Capacity: Wood: 55mm, Steel: 15mm, Masonry: 16mm
1 x 10.8-18 Volt DCB105 Multi-Voltage XR Charger varies the charge rate according to battery type to increase battery pack life. It features diagnostics with bright LED indicator which communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold. Charges all XR Li-Ion DEWALT Slide Pack 10.8, 14.4, and 18 Volt batteries.
Also supplied with: 2 x 18 Volt 5.0Ah Li-Ion Batteries and 1 x TSTAK™ Toolbox.
In the unlikely event that you need to return an item, please contact our team on 0330 123 1763 within 14 days of accepting delivery of the item. Exemptions to returns may apply in line with current legislation.
All returns must be sent to our distribution centre, details below, however we do request that you discuss the return with one of friendly team, who will help with the process.
Please note all refunds will be made to the card used to order the goods. In the case of returned items a refund will be made when we are in receipt of the item(s). Refunds can take up to three days to show on your account.
All power tools are subject to minimum warranty of 12 months, most offer an extended warranty when your tool is registered online. Most manufacturers have approved service agents and in the first instance it may be quicker and easier to take the tool to them with your proof of purchase. Your warranty begins from your date of purchase. If you are not near a warranty agent then many of the manufacturers will collect the tool from you. Please find the links below for each manufacturer and their warranty policy and procedures.
We recommend that where appropriate that you register for the 3 year warranty, this will give you peace of mind when purchasing your tool. Please note that if the failure of the tool is down to miss use by the operator, or is repaired by non-approved agent then this invalidates the warranty. There is no loan tool service whilst your machine is in for repair and in the majority of cases the machine will be repaired and not replaced. If you are unsure then please do not hesitate to contact us and we will be happy to help.
BLACK & DECKER