DCD795D2 Compact Brushless Hammer Drill Driver 18V 2 x 2.0Ah Li-Ion
Free Delivery on orders over £100 or a £5.99 charge applies.
The DEWALT DCD795 18 Volt Compact Brushless Hammer Drill Driver uses brushless motor technology for excellent efficiency. The brushless motor delivers up to 57% more run time over brushed. Its ultra compact, lightweight design allows use in confined spaces. The two speed all metal transmission increases runtime and provides a longer tool life. Compact (7.8in front to back), lightweight (1.62kg) design fits into tight areas.
High speed transmission delivers 2-speed settings (0-600/0-2,000 RPM) improving speed and torque control across a range fastening and drilling applications. It offers 0-34,000 BPM for fast drilling in masonry materials. An ergonomic comfort grip handle provides ideal balance and tool control.
The LED light with 20 second trigger release delay provides increased visibility in dark or confined spaces. The LED placement on tool foot eliminates chuck shadows. XR™ Li-Ion batteries with fuel gauge provide 33% more capacity over standard packs.
DCD795N: Bare Unit, No Battery or Charger.
DCD795D1: 1 x 18 Volt 2.0Ah Li-Ion Battery.
DCD795D2: 2 x 18 Volt 2.0Ah Li-Ion Batteries.
DCD795M1: 1 x 18 Volt 4.0Ah Li-Ion Battery.
DCD795M2: 2 x 18 Volt 4.0Ah Li-Ion Batteries.
DCD795P2: 2 x 18 Volt 5.0Ah Li-Ion Batteries.
No Load Speed: 0-600/0-2,000/Min.
Impact Rate: 0-10,200/0-34,000/Min.
Max Torque: 60Nm.
Capacity: Wood: 38mm, Steel: 13mm, Masonry: 13mm.
The DEWALT DCD795D2 Compact Brushless Hammer Drill Driver is supplied with:
2 x 18 Volt 2.0Ah Li-Ion Batteries.
In the unlikely event that you need to return an item, please contact our team on 0330 123 1763 within 14 days of accepting delivery of the item. Exemptions to returns may apply in line with current legislation.
All returns must be sent to our distribution centre, details below, however we do request that you discuss the return with one of friendly team, who will help with the process.
Please note all refunds will be made to the card used to order the goods. In the case of returned items a refund will be made when we are in receipt of the item(s). Refunds can take up to three days to show on your account.
All power tools are subject to minimum warranty of 12 months, most offer an extended warranty when your tool is registered online. Most manufacturers have approved service agents and in the first instance it may be quicker and easier to take the tool to them with your proof of purchase. Your warranty begins from your date of purchase. If you are not near a warranty agent then many of the manufacturers will collect the tool from you. Please find the links below for each manufacturer and their warranty policy and procedures.
We recommend that where appropriate that you register for the 3 year warranty, this will give you peace of mind when purchasing your tool. Please note that if the failure of the tool is down to miss use by the operator, or is repaired by non-approved agent then this invalidates the warranty. There is no loan tool service whilst your machine is in for repair and in the majority of cases the machine will be repaired and not replaced. If you are unsure then please do not hesitate to contact us and we will be happy to help.
BLACK & DECKER