Buy Power Tools

Trend

Trend Combi 66 Jig - kitchen worktop jig

Trend Combi 66 Jig - Economy jig from 500mm to 650mm wide worktops, with peninsular cut. 4 FUNCTIONS: Female Cut Male Cut Bolt Recess Curved Peninsular A single ...

£77.82 ex VAT

Trend Extra side fence for T5 router

Trend Extra side fence for T5 router The side fence has a fine micro adjuster to enable precise adjustment of the position of the cut. The fence cheeks are wide to provide good support and ...

£26.99 ex VAT

Trend Router Cutter

Trend TC 3 83D 1/2 " Router CutterGives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising ...

£17.38 ex VAT

Trend Unibase - for use with routers

Trend Unibase - the unibase enables routers with non standard guide bush fittings to accept the range of trend guide bushes. Will fit directly to most routers. **UNIBASE ONLY - ROUTER NOT INCLUDED** ...

£11.74 ex VAT

Trend RTS 1000 Router T-Square

Trend RTS/1000 Router T-Square The router T-Square can be used as a straight guide for routing housings, squaring & trimming boards and jig setting. 1000mm long blade It is ...

£37.38 ex VAT

T5 Router MK2 Trigger Lock

T5 Router MK2 Trigger LockTo lock trigger in 'on' position when using table mode with a No-Volt release switch fitted.

£2.60 ex VAT

Trend Beam Trammel for T5 router

Trend Beam Trammel for T5 router The beam trammel is connected to one of the side-fence rods and has an adjustable pin with a point. It enables the T5 to be guided precisely to cut circles or ...

£12.17 ex VAT

Trend Direct fit guide bushes for the T10 router

Trend Direct fit guide bushes for the T10 router These guide bushes can be used as a direct fit to the router for general work where absolute accuracy is not the main requirement.

£11.29 ex VAT

Trend FHA003 Fine Height Adjuster for T10 router

Trend FHA003 Fine Height Adjuster for T10 router Fits in place of the knurled knob and provides fine height adjustment of the cutter in a table or with a dovetail jig.

£16.09 ex VAT

Trend Guide Bushes for the T10-T11-T5-T3

Trend Guide Bushes for the T10/T11/T5/T3 Guide bushes to fit the adjustable inner plate on the base of the router.

£5.43 ex VAT

Trend storage case for T5 Router

Trend storage case for T5 RouterAs supplied with 'K' models of the T5, provides protection for the T5 and accessories.

£27.82 ex VAT

Trend T10-11 Collets

Trend T10/11 ColletsPrecision multi-slit one-piece collets in a variety of sizes.

£16.96 ex VAT

Trend T11 Direct Fit Large Guide Bushes

Trend T11 Direct Fit Large Guide BushesAvailable in 50, 60 and 70mm

£8.70 ex VAT

Trend T11-JT-KIT Quick release kit

Trend T11/JT/KIT Quick release kit This is a Trend T11 accessory. The quick release kit comprises three sets of cams, bolts & fixings

£17.38 ex VAT

Trend T11CGSKIT Clamp Guide System Kit

Trend T11CGSKIT Clamp Guide System Kit This is a Trend T11 accessory. Comprising alloy bracket fixing & plastic slider.

£34.77 ex VAT

Trend T11QHA Quick Height Adjuster

Trend T11QHA Quick Height AdjusterThis is a Trend T11 router accessory. A hand brace with universal joint and socket for fast adjustment when using router in table.

£15.65 ex VAT

Trend T3 router collar

Trend T3 router collarA collar that increases neck of router from 42mm to 43mm, to allow use in drilling stands

£3.47 ex VAT

Trend T5-T3 router fine height adjuster

Trend T5/T3 router fine height adjuster Fits in place of the depth stop and threads onto the longest revolving turret screw. It enables extra fine vertical adjustment of the cutter. Recommended for ...

£9.56 ex VAT