Dewalt D24000 - 250mm Slide Table Wet Tile Saw - 110V ONLY

**PLEASE NOTE LEG STAND NOT INCLUDED**

Dewalt D24000 250mm Slide Table Wet Tile SawFor cutting tiles and a number of other building materials; ceramic, natural stone and composite material, interior and exterior tiles.The depth of a building tile cut with this saw range from 20mm to 60mm . Due to the fixed head and patented sliding bed the D24000 is extremely easy to use. Whether rip, bevel or plunge cutting the saw is quick and easy to adjust and extremely accurate. Due to its fixed head and removable water trays and legs the saw is compact and lightweight to transport.Features

• Stainless steel rail system is intergrated into the tile saw frame, ensuring accurate cuts
• Cantilevering rail / cart sytem allows for 610mm ripping capacity
• Relatively low weight allows one person to transport and set up saw
• Intergrated 45 / 22.5 degree feature for quick angle cuts
• Plunge feature allows the user to make quick plunge cuts for electrical outlets
• Dual water nozzles can be adjusted for optimal water placement on the blade in order to minimise over-spray and mist
• Rear and side water attachments can be placed on the tile saw to catch overspray - keeping the water in the pan
• Removeable cutting cart for easy cleaning of tile saw
• Edge guide with two positions (90 & 45 degree) allows easy line up of corner cuts

Comes With:

• Cutting disc
• Extention table
• Side and rear water collector
• Hex key

Specification

• Power Input - 1600W
• Wheel Diameter - 250mm
• No Load Speed - 4200rpm
• Depth of Cut - 95mm
• Max. Crosscut Capacity at 90 degrees - 610mm
• Max. Crosscut Capacity at 45 degrees - 450mm
• Weigth - 32kg
• WidthxLength - 690 x 860mm

**Please note this item is only available in 110V**